Home Inspections-Mold Remediation

Mold, Moisture, and Your Home…(Your life could depend on a Mold Inspection!)

TriSeal will help all Mold Problems. Going Green

Please read the follow in information:

Mold Basics 

• The key to mold control is moisture control. 
• If mold is a problem in your home, you should clean up the mold promptly and fix the water problem. 
• It is important to dry water-damaged areas and items within 24-48 hours to prevent mold growth. 

Why is mold growing in my home?

Molds are part of the natural environment. Outdoors, molds play a part in nature by breaking down dead organic matter such as fallen leaves and dead trees, but indoors, mold growth should be avoided. Molds reproduce by means of tiny spores; the spores are invisible to the naked eye and float through outdoor and indoor air. Mold may begin growing indoors when mold spores land on surfaces that are wet. There are many types of mold, and none of them will grow without water or moisture. 

Can mold cause health problems? 

Molds are usually not a problem indoors, unless mold spores land on a wet or damp spot and begin growing. Molds have the potential to cause health problems. Molds produce allergens (substances that can cause allergic reactions), irritants, and in some cases, potentially toxic substances (mycotoxins). Inhaling or touching mold or mold spores may cause allergic reactions in sensitive individuals. Allergic responses include hay fever-type symptoms, such as sneezing, runny nose, red eyes, and skin rash (dermatitis). Allergic reactions to mold are common. They can be immediate or delayed. Molds can also cause asthma attacks in people with asthma who are allergic to mold. In addition, mold exposure can irritate the eyes, skin, nose, throat, and lungs of both mold-allergic and non-allergic people. Symptoms other than the allergic and irritant types are not commonly reported as a result of inhaling mold. Research on mold and health effects is ongoing. This brochure provides a brief overview; it does not describe all potential health effects related to mold exposure. For more detailed information consult a health professional. You may also wish to consult your state or local health department. 

How do I get rid of mold? 

It is impossible to get rid of all mold and mold spores indoors; some mold spores will be found floating through the air and in house dust. The mold spores will not grow if moisture is not present. Indoor mold growth can and should be prevented or controlled by controlling moisture indoors. If there is mold growth in your home, you must clean up the mold and fix the water problem. If you clean up the mold, but don’t fix the water problem, then, most likely, the mold problem will come back. TriSeal will give a Lifetime Warranty Interior and 7 year Warranty Exterior when applied by World Class Property Services. 

Who Should do the Cleanup 

Who should do the cleanup depends on a number of factors. One consideration is the size of the mold problem. If the moldy area is less than about 10 square feet (less than roughly a 3 ft. by 3 ft. patch), in most cases, you can handle the job yourself, following the guidelines below. 

• If there has been a lot of water damage, and/or mold growth covers more than 10 square feet, consult the U.S. Environmental Protection Agency (EPA) guide: It is available free by calling the EPA Indoor Air Quality Information Clearinghouse at (800) 438-4318. 
• If you choose to hire a contractor (or other professional service provider) to do the cleanup, make sure the contractor has experience cleaning up mold. Check references and ask the contractor to follow the recommendations of the EPA, the guidelines of the American Conference of Governmental Industrial Hygienists (ACGIH), or other guidelines from professional or government organizations. 
• If you suspect that the heating/ventilation/air conditioning (HVAC) system may be contaminated with mold (it is part of an identified moisture problem, for instance, or there is mold near the intake to the system), consult EPA’s guide Should You Have the Air Ducts in Your Home Cleaned? before taking further action. Do not run the HVAC system if you know or suspect that it is contaminated with mold – it could spread mold throughout the building. 
• If the water and/or mold damage was caused by sewage or other contaminated water, then call in a professional who has experience cleaning and fixing buildings damaged by contaminated water. 
• If you have health concerns, consult a health professional before starting cleanup. 

Tips and Techniques 

The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic damage. It may not be possible to clean an item so that its original appearance is restored. 

• Fix plumbing leaks and other water problems as soon as possible. Dry all items completely. 
• Scrub mold off hard surfaces with detergent and water, and dry completely. 
• Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely. 
• Avoid exposing yourself or others to mold. 
• Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel. 
• If you are unsure about how to clean an item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations. 

What to Wear when Cleaning Moldy Areas 

• Avoid breathing in mold or mold spores. In order to limit your exposure to airborne mold, you may want to wear an N-95 respirator, available at many hardware stores and from companies that advertise on the Internet. (They cost about $12 to $25.) Some N-95 respirators resemble a paper dust mask with a nozzle on the front, others are made primarily of plastic or rubber and have removable cartridges that trap most of the mold spores from entering. In order to be effective, the respirator or mask must fit properly, so carefully follow the instructions supplied with the respirator. Please note that the Occupational Safety and Health Administration (OSHA) requires that respirators fit properly (fit testing) when used in an occupational setting; consult OSHA for more information (800-321-OSHA). 

• Wear gloves. Long gloves that extend to the middle of the forearm are recommended. When working with water and a mild detergent, ordinary household rubber gloves may be used. If you are using a disinfectant, a biocide such as chlorine bleach, or a strong cleaning solution, you should select gloves made from natural rubber, neoprene, nitrile, polyurethane, or PVC. Avoid touching mold or moldy items with your bare hands. 
• Wear goggles. To avoid getting mold or mold spores in your eyes, safety goggles that do not have ventilation holes are recommended. 

How Do I Know When the Remediation or Cleanup is Finished? 

You must have completely fixed the water or moisture problem before the cleanup or remediation can be considered finished. 

• You should have completed mold removal. Visible mold and moldy odors should not be present. Please note that mold may cause staining and cosmetic damage. 
• You should have revisited the site(s) shortly after cleanup and it should show no signs of water damage or mold growth. 
• People should have been able to occupy or re-occupy the area without health complaints or physical symptoms. 
• Make sure you have a Air sample before clean up and after clean up to make sure all spores are gone. 

Moisture and Mold Prevention and Control Tips 

• Moisture control is the key to mold control, so when water leaks or spills occur indoors – ACT QUICKLY. If wet or damp materials or areas are dried 24-48 hours after a leak or spill happens, in most cases mold will not grow. 
• Clean and repair roof gutters regularly. 
• Make sure the ground slopes away from the building foundation, so that water does not enter or collect around the foundation. 
• Keep air conditioning drip pans clean and the drain lines unobstructed and flowing properly. 
• Keep indoor humidity low. If possible, keep indoor humidity below 60 percent (ideally between 30 and 50 percent) relative humidity. Relative humidity can be measured with a moisture or humidity meter, a small, inexpensive ($10-$50) instrument available at many hardware stores. 
• If you see condensation or moisture collecting on windows, walls or pipes ACT QUICKLY to dry the wet surface and reduce the moisture/water source. Condensation can be a sign of high humidity. 

Actions that will help to reduce humidity: 

• Vent appliances that produce moisture, such as clothes dryers, stoves, and kerosene heaters to the outside where possible. (Combustion appliances such as stoves and kerosene heaters produce water vapor and will increase the humidity unless vented to the outside.) 
• Use air conditioners and/or de-humidifiers when needed. 
• Run the bathroom fan or open the window when showering. Use exhaust fans or open windows whenever cooking, running the dishwasher or washing dishes, etc. 

Actions that will help prevent condensation: 

• Reduce the humidity (see above). 
• Increase ventilation or air movement by opening doors and/or windows, when practical. Use fans as needed. 
• Cover cold surfaces, such as cold water pipes, with insulation. 
• Increase air temperature. 

Testing or Sampling for Mold 

Is sampling for mold needed? In most cases, if visible mold growth is present, sampling is unnecessary. Since no EPA or other federal limits have been set for mold or mold spores, sampling cannot be used to check a building’s compliance with federal mold standards. Surface sampling may be useful to determine if an area has been adequately cleaned or remediated. Sampling for mold should be conducted by professionals who have specific experience in designing mold sampling protocols, sampling methods, and interpreting results. Sample analysis should follow analytical methods recommended by the American Industrial Hygiene Association (AIHA), the American Conference of Governmental Industrial Hygienists (ACGIH), or other professional organizations. 

Suspicion of hidden mold 

You may suspect hidden mold if a building smells moldy, but you cannot see the source, or if you know there has been water damage and residents are reporting health problems. Mold may be hidden in places such as the back side of dry wall, wallpaper, or paneling, the top side of ceiling tiles, the underside of carpets and pads, etc. Other possible locations of hidden mold include areas inside walls around pipes (with leaking or condensing pipes), the surface of walls behind furniture (where condensation forms), inside ductwork, and in roof materials above ceiling tiles (due to roof leaks or insufficient insulation). Have a air sample done.

Investigating hidden mold problems 

Investigating hidden mold problems may be difficult and will require caution when the investigation involves disturbing potential sites of mold growth. For example, removal of wallpaper can lead to a massive release of spores if there is mold growing on the underside of the paper. If you believe that you may have a hidden mold problem, consider hiring an experienced professional. 

Cleanup and Biocides 

Biocides are substances that can destroy living organisms. The use of a chemical or biocide that kills organisms such as mold (chlorine bleach, for example) is not recommended as a routine practice during mold cleanup. There may be instances, however, when professional judgment may indicate its use (for example, when immune-compromised individuals are present). In most cases, it is not possible or desirable to sterilize an area; a background level of mold spores will remain – these spores will not grow if the moisture problem has been resolved. If you choose to use disinfectants or biocides, always ventilate the area and exhaust the air to the outdoors. Never mix chlorine bleach solution with other cleaning solutions or detergents that contain ammonia because toxic fumes could be produced. 

Please note:Dead mold may still cause allergic reactions in some people, so it is not enough to simply kill the mold, it must also be removed or have TriSeal applied. See our TriSeal page for more information. We offer protocol and non-protocol clean up.

Home Inspections

Residential Inspections

It is critical to choose the right inspector for one of the most important emotional decisions and financial investments that you will ever make. Brett Gordon, the company’s owner is dedicated to providing the most professional and personal service possible.

The average inspection is 2-4 hours, and may take longer for larger properties. If you have a guesthouse or freestanding structures on the property, please advise us so that we can allow additional time. This is an ideal opportunity for you to spend time in the home and we encourage you to attend the inspection. We will lead you through a detailed “look” at your new home. Any information affecting the value or desirability of the house is within your right to know.

Our thorough home inspection will include the following:

• Exterior Siding materials, EIFS stucco (exterior insulating finishing systems), Hardcoat stucco. Louisiana Pacific siding and other class action siding materials. Trim, windows, doors, and other visible exterior attached or detached related components
• Interior Floors, walls and ceilings. Built-in appliances/equipment, smoke detectors and safety-related items, fireplaces and other visible interior-related components
• Roof Shingles, flashings, chimneys, vents, skylights, gutters and downspouts as well as other visible roof related items
• Attic Insulation, ventilation, rafters, joists, trusses, water damage, roof leaks and other visible attic related items
• Basements, Finished and unfinished basements for structural conditions, insulation, water problems and habitability – If the basement is unfinished, can it be finished?
• Crawl Spaces, Insulation, ventilation, vapor barriers, supporting posts and columns, water damage, structural deficiencies and water intrusion problems. We will provide you with a qualified mold prevention service.
• Termite Inspectors, as needed, that will be at the home inspection the same time you are.
• Foundation and Structure, We inspect your foundation and structure for settlement and displacement caused by workmanship, poor design, erosion or time. We will provide you with references for qualified Termite Inspectors, as needed, if termites are found.
• Decks and Porches, We will inspect your attached decks and porches, new and old, to the most current and up to date building and safety standards available from the International Residential Building Code
• Garages,attached or detached. We will inspect your garages for structural conditions, and test your garage doors and garage door openers for safety concerns
• Bath rooms, kitchens and all plumbing fixtures including sinks and faucets, bath/showers and jetted tubs, water distribution system and sanitary system. We inspect for Polybutylene – both blue and gray, and other class action plumbing materials, tank and tankless water heaters and other plumbing related items
• Heating and Cooling Systems Furnaces and air conditioning units. Air ducts, air cleaning/ filtering systems and other related HVAC components
• Electrical Systems Service entry and service panel – switches and outlets – visible wiring and grounding system. Electrical safety devices such as Ground Fault Circuit Interrupters (GFCI) and Arc Fault Circuit Interrupters (AFCI) are tested and re-tested as well as other related electrical components. Did you know that Federal Pacific electrical panels are a fire risk?
• Some of our services offered : Mold Inspection, Mold Prevention, Mold Remediation, Air Testing, Water Testing, Allergen Testing,  Radon Testing, Radon Screening, Lead Paint Testing, Termite Letter, Dryer Vent Cleaning,  TriSeal,  HVAC Protection, Carpet Selections / Installation and Pet Urine Detection. We even have an Interior Designer on staff.                               
• We have many more services. See Services for more information.